SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Part - In the long run, lift truck components will wear and must be replaced. Buying new parts can become a pricey endeavor so one more idea is to obtain used lift truck components. This can save a lot of money eventually. It is a great idea to acquire used forklift parts which have been reproduced. These parts will ensure that you are getting parts which will work for a long time and be productive.
Broken or worn parts which are remanufactured are a cheaper solution as opposed to rebuilding. With rebuilding parts, just the parts that are broken or worn out get changed, which means that other wearable components may break down soon after purchase.
Remanufactured parts are cleaned after being taken apart and have the unusable components replaced. This technique can provide the best assurance for second-hand parts. All wearable parts are replaced regardless of age or wear which is one more reason why reproduced parts on the whole function so much better. Any part within the part is brand new and this provides much longer life to the used part. Depending on the lift truck parts that are being redone, the cleaning process and the entire remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Several components of the engine like for example rings, pistons, spark plugs, filters, valves, and valve springs could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A complete examination is performed to check for any cracks. Bushings, seals and bearings are all replaced. Typically, the replacement components utilized on transmission components meet OEM specifications.
Some forklift parts like the water pump, torque converters, the alternator, the starter and steer axles can be quite serviceable after worn components are replaced. The electronic control in the electric forklift parts is maintained by the control card. This card can also be remanufactured with replacing all aged and worn out parts. Unlike different lift truck components the control card could only have the worn and aged components replaced.
Components which are remanufactured have to be thoroughly inspected upon reassembly to ensure they are in good condition before being sold. When acquiring these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain bigger components like engines, transmissions and steer axles, OEM specification replacement parts should be used.
The forklift dealer can ensure that the components they have remanufactured meet the OEM specifications. This will also guarantee the components meet industry standards. Many details go into remanufacturing used components. This attention to detail provides more serviceability out of remanufactured parts compared to the components that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartsnebraska.com
Email Us
About Us